JTX1000

Honda Prelude BA5 Key Cylinder Reconfigure

First you need 2 or more set of cylinder lock before proceed.
The more the better  and the faster the process.
Take out the pins and compare the pins.
The cylinder lock must have flat configuration.
This configuration still dont match  the key. Try to swap the pin again.
The pin. Some pin need to be modified in order to fit the cylinder lock.
Different pin. Some metal and some cooper.

The different.
Cylinder serial number.
Now, it is flat. Test it with the outer housing.
Several test may be  done to confirm the configuration.
Clean it and grease it. Good Luck.

4 comments:

  1. This is cool and very nice informative issues. Thanks for taking the time to discuss that.
    I'll try to consider it for my future references, thanks for this great article.

    ReplyDelete
    Replies
    1. I'd like to share some idea and this tutorial is based on Internet Reference..

      Delete
  2. Really impressive post. I read it whole and going to share it with my social circles. I enjoyed your article and planning to rewrite it on my own blog. PowerBore Cylinder Sleeves

    ReplyDelete